have now checked it with the second M5Paper but this can also log on to the WLAN and also syncronize. But just the first time, then I am also with this an active connection on the M5Paper displayed but in the WLAN of the router but he is grayed out (so no longer connected) and a second syncronisieren fails!

Maybe they are busy using it.

Hi skink you're very welcome. The required fix mentioned before has now been included to the M5Core2 library so hopefully in one of the next UIFlow updates it will be picked up. Happy Stacking! Felix

Thanks for the tip. Unfortunately I am not that involved in micropython. Will there be a UIFlow version in the future where you can connect the Atom Light or Matrix with Hats provided you have the Atom-Mate !

@ m5stack I have installed the update. Now it works great!! With version 1.4.5 and 1.5.1 ! Thank you very much for the fast problem solution!! Top !! greeting skink

Same problem here since weeks. It does not work with firmware 1.5.x

@Michael1968, Yes, there it goes really very fast, I ordered the Base NodeSKU:M017 on Saturday. Yesterday he already went out. I am curious when he will be here but from the Netherlands it doesn't take so long after Siegen ! I can only recommend the shop ! greeting Skink

@Skink do you still have the source code from https://github.com/m5stack/PbHUB/tree/master/PortB_HUB/Firmware ?

@skink said in Application M5 AC Socket: Hi at all, is there a test program or an EasyLoader program with which I test the M5 AC socket !? I have M5 stack with RS485 to TTL Unit or also a M5 Stick-C with M5StickC RS485 HAT. ! [image: 1570083025243-dsc_1122-resized.jpg] [image: 1570083067753-dsc_1123-resized.jpg] Thx! Skink The only known information is found here: https://docs.m5stack.com/#/en/app/ac_socket . I’m still waiting on one to be delivered

@ajb2k3 said in Application M5Stack Demo-Board (Factory-Test): Try deleting the circle at the beginning of the line. I've already done that, erased the circle in front of the bracket. But nevertheless it runs only up to function 6! Just found out, that I get the following error message working with Arduino 1.8.9 when I load the code into Arduino !! Error message : "MFRC522_i2C.cpp" contains unknown characters. If the code was created with an older version of Arduino, you might want to use Tool -> Correct Coding & Reload etc. etc. to correct the code. But even afterwards the program runs only up to function 6!

@ajb2k3 thank you , it work´s Greetings skink

@skink Hello, skink. Good afternoon! Has your problem been solved?

@lastcaress 在 M5Fire and MLX90640 works 中说： The code was compiling, it just didn't do anything when I connected the camera. Tried m5 core, fire and nothing. Tried today with m5go and it worked! [image: a7NXJWg.jpg] I think i have too many m5stack things thats quite a collection you have there.