Subcategories

• Modules
  453
  Topics
  1.6k
  Posts

  A

  @scaramanga have you checked the product listing and documents on the M5Stavk website?

• FAQS

  When you meet problems using M5Stack, we help you solve it.

  181
  Topics
  923
  Posts

  P

  @Ariel-Jorge , Thanks! It worked perfectly for me!

• Units
  445
  Topics
  1.7k
  Posts

  F

  Hello @HappyUser

  the code works for me using M5Core2v1.1 and the following modifications:

  //#include <M5Core2.h> <-- replace this with below lines #include <M5Unified.h> #include <Wire.h> M5.begin(); Wire.begin(); <--- add this after above line

  Thanks
  Felix

• Cores

  Core2 for AWS M5Stack Fire M5stack Grey M5 Stick/StickC M5GO FACES Kit M5Stick V Core 2
  1.2k
  Topics
  5.2k
  Posts

  C

  @felmue said in M5Stack Core Basic as Meshtastic Device:

  Hi guys

  I don't think you can use pre-compiled Meshtastic firmware as some GPIOs used in pre-compiled firmware cannot be selected in LoRa868 V1.1 module.

  From the M5Stack Meshtastic variant.h file and the previous LoRa module I understand the following GPIOs are used:

  SCK : GPIO18 MISO : GPIO19 MOSI : GPIO23 CS/NSS: GPIO5 IRQ : GPIO36 RST : GPIO26

  However the newer LoRa868 V1.1 module doesn't allow to select GPIO36 as IRQ nor GPIO26 as RST.

  So I think you either need to compile Meshtastic firmware (with the correct GPIOs) yourself, get the older LoRa868 module or modify the V1.1 hardware.

  Note: I do not have the necessary hardware to test this myself - so my above conclusions could be incorrect.

  Thanks
  Felix

  Is there an answer from M5Stack specialists?

• Bases
  43
  Topics
  173
  Posts

  K

  My guess is no, since I can't get it to work.

• Atom

  For topics on the M5Stack Atom.

  210
  Topics
  691
  Posts

  K

  @Ruud-Noordermeer
  Recently a bug was fixed in userdemo firmware that images cannot post to EZData2. Maybe you can try it again?