Hi Paopao,
I am in your same situation, I have been trying to communicate UHF-RFID-UNIT with Aton Lite and I don't know the right code.
Could you spend the code to start my project?
are the aforementioned 25 minutes from a fully charged TailBat? That seems a bit short.
I've measured the power consumption of the Atom GPS kit (w/o sd card) and it takes about 100 mA. So it should not suffer from a premature shutdown due to consuming too little power as the shutdown current limit in the TailBat is about 45 mA.
The TailBat has a 190 mAh battery - so theoretically you should get close to 2 hours out of it.
@holofloh Ahh, thank you! I think I understand a little better now. I think I misunderstood exactly what an access point was supposed to do. I'll try your suggestions and let you know how it works.
Thanks again!
This is normal if the Atom is not doing anything.
The Power chip expects a certain load to keep alive, it the atom is in standby then the load is too small and will cut out.
I also have an Atom GPS module and a LoRaWAN868 module. I plan to use both of them together to track my bike. I already got the GPS running using ESPHome. Unfortunately there seems to be no LoRa integration into ESPHome.