@Bat21
This is the proyect.
https://uiflow2.m5stack.com/?pkey=a4a84f44144c4c8dbe372b983a04ada4
@Bat21
This is de proyect.
Este es el proyecto
https://uiflow2.m5stack.com/?pkey=b0d334240ade47ed9da0f31549677850
@Bat21
Hello everyone,
How can I share the project so I can see if you can help me with the error I mentioned?
Thanks.
Hola a tod@s,
Como puedo compartir el proyecto para ver si me echáis un mano con el error expuesto.
gracias.
@Bat21hello to tod@s
There are no answers to this incident?
Am I doing something wrong?
Good afternoon,
I use UIFOLW 2 version 2.3.4 and Core basic.
I have purchased several Unit Hbridge modules with version 1.1.
When I run the "Set" commands, they work correctly, or so it seems.
When I add a "Get" command, the error shown on the screen appears.
If I use UIFOLW 2 version 2.3.5, the battery data is incorrect.
I have purchased many M5stack products, and none of them work correctly; they all have errors.
I would like to know what is happening with this device because it loses I2C communication.
And it stops working.
If I run this code, which is the one I'm interested in, I get the error shown on the screen.
Error in the image
Has this happened to anyone else?
What am I doing wrong?
Or is it an I2C port error?
How can I see the I2C address of the Unit H Bridge device?
Thanks.
@Bat21
Tested in UIFlow 1 with the sample program, it doesn't work either.
Here's the error:
I can't work with these new modules.
It's very important to me that they work.
Good afternoon,
I use UIFOLW 2 version 2.3.4 and Core basic.
I have purchased several Unit Hbridge modules with version 1.1.
When I run the "Set" commands, they work correctly, or so it seems.
When I add a "Get" command, the error shown on the screen appears.
If I use UIFOLW 2 version 2.3.5, the battery data is incorrect.
I have purchased many M5stack products, and none of them work correctly; they all have errors.
I would like to know what is happening with this device because it loses I2C communication.
And it stops working.
If I run this code, which is the one I'm interested in, I get the error shown on the screen.
Error in the image
Has this happened to anyone else?
What am I doing wrong?
Or is it an I2C port error?
How can I see the I2C address of the Unit H Bridge device?
Thanks.
@Bat21 said in Module GPS:
Any thoughts on this issue?
I'm at the end of the project, and the readings are displayed in the same format.
@Bat21 said in Module GPS:
Any thoughts on this issue?
I'm at the end of the project, and the readings are displayed in the same format.