How do you guys track the amperage draw of the stick when sleeping? Do you take it apart, cut a power line, hook up a multimeter in between, and later resolder? Also have you guys experimented with the difference between M5.Axp.DeepSleep(); and esp_deep_sleep_start();? AFAIU Axp.DeepSleep is only supposed to turn off "external devices" (gyro, screen, etc.) but not the ESP itself, right? And @Morris45 what does the Wire.begin(32, 33); line do in your code above? And why are we commenting out M5.begin()? What's the battery life you're getting from your watch? I'm trying to do a simple infrared remote (that only wakes up when you first pres the main button) and even in full deep sleep, I'm only getting 2 days.

@lukasmaximus Thanks !

@Carlos-De-Soto a stacking project ? look at https://github.com/m5stack/M5Stack_TFT_ILI9341 You'll find different screens at waveshare.

@m5stack Thanks. If the other solution I am looking at does not work out I will do as you suggest. Thanks again.

I'm flabbergasted. It really worked. The colors are okay now. Thanks!

@m5stack Thanks.

@wimfish product question you can contact our store

@dschunge said in UiFlow Image is not shown on the Display: I have a problem with UIFlow and showing my own Image on the screen. If I upload a jpg image it never shows up on the display. If I choose one of the existing (default.jpg or error.jpg) images, everything works fine. Any ideas? Images are required to be formatted and saved in a very special way. .JPG files must have the .JPG extension. .JPG file must have "Baseline" formatting. Progressive and Lossless JPEG format is not supported. Image size: Up to 65520 x 65520 pixels. Colour space: YCbCr three components only. Gray scale image are not supported. Sampling factor: 4:4:4, 4:2:2 or 4:2:0.

@iwasada of course it can use RFID Unit

@emuboy said in BALA module schematics?: I'm looking for some documentation on the bala, the pinout, the schematics, where I can find it? try this https://docs.m5stack.com/#/en/app/bala

Thank you for your solution! It works!

same problem!!! solved on commenting out gpio_deep_sleep_hold_dis(); in Documents/Arduino/libraries/M5Stack/src/utility/Power.cpp I don't know why, but now arduino compile

@androidspa said in LEGO+ Issue: I think I may have found a solution for controlling the LEGO+ module. It turns out that when you install the arduino library for the M5Stack, there is an example to interface the LEGO module. It is located in File>Examples>M5Stack>Modules>LEGO_PLUS>LEGO_test From that example code the I2C commands can be figured out. I hope this information is useful to anybody facing the same issue as me

M5.Lcd.fillScreen(BLACK)