Its broken again
File "M5Burner.py", line 17, in <module>
fw_list = json.loads(f.read())
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/json/__init__.py", line 338, in loads
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/json/decoder.py", line 366, in decode
obj, end = self.raw_decode(s, idx=_w(s, 0).end())
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/json/decoder.py", line 382, in raw_decode
obj, end = self.scan_once(s, idx)
ValueError: Expecting , delimiter: line 38 column 1 (char 1675)
Thank you for answering.
I used the firmware when I purchased M5GO.
By using the Japanese manual that you taught, I was able to check the operation in UIFlow.
I did not know that M5GO WebIDE can not be used.
I will use UIFlow or M5Cloud in the future.
Thank you very much.
@heybin I looked for the float and int block in the v1.0 release but I didn't see them. Can you tell me the status on this issue. By the way it looks like as of 0.91 the python code being generated is now casting all variables used in a for loop to float type and their is no longer an error caused by mixed types. I'm not sure if you are still planning to have blocks to specify types but I think it could be a good feature to have.
The coding platforms you can connect to (m5go, m5cloud, ui flow) depend on what firmware you have burned
on your device. For example if you have m5go firmware you cannot connect to the ui flow site with it.
The firmware can be easily changed/re-flashed by using the burner tools on our website
for windows http://flow.m5stack.com/download/M5Burner-flow-only.zip
for mac http://flow.m5stack.com/download/M5Burner_MacOS.zip
You can follow this youtube guide on how to flash your device if you get stuck
Hope this helps, let us know if you manage to get setup
Author of the aforementioned thread here.
The hardware mod is the only solution for complete silence - the amplifier inputs will always pick up noise from something.
If you look at commercial DAC + amplifier ICs, they also mute the amplifier after a period of silence so it's a common issue.