@dschunge said in UiFlow Image is not shown on the Display:
I have a problem with UIFlow and showing my own Image on the screen. If I upload a jpg image it never shows up on the display. If I choose one of the existing (default.jpg or error.jpg) images, everything works fine. Any ideas?
Images are required to be formatted and saved in a very special way.
.JPG files must have the .JPG extension.
.JPG file must have "Baseline" formatting.
Progressive and Lossless JPEG format is not supported.
Image size: Up to 65520 x 65520 pixels.
Colour space: YCbCr three components only.
Gray scale image are not supported.
Sampling factor: 4:4:4, 4:2:2 or 4:2:0.
@androidspa said in LEGO+ Issue:
I think I may have found a solution for controlling the LEGO+ module.
It turns out that when you install the arduino library for the M5Stack, there is an example to interface the LEGO module. It is located in File>Examples>M5Stack>Modules>LEGO_PLUS>LEGO_test
From that example code the I2C commands can be figured out. I hope this information is useful to anybody facing the same issue as me
Its broken again
File "M5Burner.py", line 17, in <module>
fw_list = json.loads(f.read())
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/json/__init__.py", line 338, in loads
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/json/decoder.py", line 366, in decode
obj, end = self.raw_decode(s, idx=_w(s, 0).end())
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/json/decoder.py", line 382, in raw_decode
obj, end = self.scan_once(s, idx)
ValueError: Expecting , delimiter: line 38 column 1 (char 1675)