M5 CoreS3 problems
-
I have just got the M5 CoreS3, I have played with the ESP32S3 a bit, but this is my first M5Stack unit.
I am having lots of problems. If I take it as is, it will not talk to my Windows 11 computer (the only computer I have tried so far)
-
why is there not a group for it on in the Community, that is why I am starting here?
-
if I have it as shipped, I get a bad USB device and no comms port. I have two comms ports reported, but I think these are from another ESP32S3, but I can not find it currently. Far too many USB cables
-
if I unplug the "DIN BASE" from the stack, Then sometimes (most of the time) I get a comms port trying to pull the firmware out, I like to back up things, but after a few minutes the unit reboot and it loss the comms port, and unplug it for a minute or so and then plug it back in the comms port comes back.
-
my virus scanner does not like "CoreS3 TP Upgrade V0.5.exe"
Roger
-
-
No, The ESP32S3 does indeed have 2 com ports but you have to put the Core S3 into Boot mode to program it.
- In most cases it's the USB cable or the Host PC that is the problem. Windows has issues with its come port communications with S3's.
- huh, what, All firmware is available in M5Burner unless you made it yourself then you should be backing up your own files.
- Never heard of CoreS3 TP Upgrade V0.5.exe
M5Burner is the program for burning firmware.
