Topics created by Exie

Thanks for the tip @flypeek I checked with my Hello World code and this worked. I did not expect the AtomS3 to be that different to the original AtomMatrix. However I just confirmed if I change the "board" to just M5Stack-Atom all the original code compiles. I would have expected big changes if we referred to the ESP32-C3 with the new RISC architecture, but the S3 was fairly similar I thought. I presume it has a new board definition due to the LCD screen on the AtomS3. If I can get the Zigbee unit working nicely, I might port the example over and post up a PR in the AtomS3 library. Many thanks again @flypeek you have unblocked me and I can keep moving forward (I hope).

Hi @Exie, have you managed to talk to the Zigbee unit through UART or managed to comprehend the example code given by M5Stack? Regards, Ameer

Finally got the notification today and put an order in. I was tempted to order a heap of them, but given they are obviously in short supply I ordered a minimal qty so I hope others can get some too. They look fantastic!

@exie @felmue I have never worked with micropython, however ESP32 can act as a slave on the I2C bus without any issues, irrespective of the pins that are used (any pair of GPIO can, in fact, be used as front-end for the I2C interface). I've taken a peek to the linked thread and the idea of continuously polling the bus to reply to an address as a slave is quite cumbersome and to say the least, inefficient.

They are available only as PH2.0 4P connectors you can order them from china or on eBay but they are white SMD mount devices as you can see in this image. The coloured ones I are spare from M5Stack projects and haven't been able to find a source of them yet. If you still can't find them message me I can sell white THT ones for GBP £4 for a pack of 10 but there will be P&P to be paid on top of that price.

@ajb2k3 said in Cheap camera module for M5Stack Atom Matrix: https://shop.m5stack.com/collections/m5-unit/products/unit-cam-wi-fi-camera-diy-kit-ov2640 I was not able to have my Atom Matrix interact with the OV2640 Unit Cam... @Exie were you able to connect your Atom Matrix with the Unit Cam and have the Matrix retrieve the Unit Cam output?

By way of extension, the bluetooth statck doesnt seem to be in the UI Flow 1.7.6 image for the Atom Matrix: configsip: 188777542, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff0018,len:4 load:0x3fff001c,len:5280 ho 0 tail 12 room 4 load:0x40078000,len:12908 load:0x40080400,len:3512 entry 0x4008063c _ __ _ _ _(_)/ _| | _____ __ | | | | | |_| |/ _ \ \ /\ / / | |_| | | _| | (_) \ V V / \__,_|_|_| |_|\___/ \_/\_/ APIKEY: <hidden> Traceback (most recent call last): File "_flow.py", line 44, in <module> KeyboardInterrupt: MicroPython a431828aa-dirty on 2021-04-29; M5Stack with ESP32 Type "help()" for more information. >>> >>> help("modules") IoTcloud/AWS hardware/__init__ ucollections units/_ir IoTcloud/Ali hardware/button ucryptolib units/_joystick IoTcloud/Azure hmac uctypes units/_laserrx IoTcloud/Tencent i2c_bus uerrno units/_lasertx IoTcloud/__init__ inisetup uhashlib units/_light IoTcloud/blynk libs/__init__ uhashlib units/_makey MediaTrans/TimerCam libs/bmm150 uheapq units/_mlx90640 MediaTrans/__init__ libs/bmp280 uiflow units/_ncir MicroWebSrv/__init__ libs/config uio units/_op MicroWebSrv/microWebSocket libs/dht12 ujson units/_pahub MicroWebSrv/microWebSrv libs/easyIO umqtt/__init__ units/_pbhub MicroWebSrv/microWebTemplate libs/echo umqtt/robust units/_pir ThirdParty/myCobot/myCobot libs/emoji umqtt/simple units/_relay ThirdParty/myCobot/myCobotPro libs/imu unit units/_relay4 __main__ libs/m5mqtt unitcam units/_rfid _boot libs/micropyGPS units/VFunction/__init__ units/_rgb _flow libs/mpu6050 units/VFunction/_apriltag_code units/_rgb_multi _onewire libs/mstate units/VFunction/_bar_code units/_servo _thread libs/numbers units/VFunction/_color_track units/_tof _uasyncio libs/nvs units/VFunction/_dm_code units/_tracker _webrepl libs/pca9685 units/VFunction/_face_detect units/_tvoc apa106 libs/pid units/VFunction/_jpeg_transfer units/_uhf_rfid base/GPS libs/servo units/VFunction/_line_tracker units/_ultrasonic base/HDriver libs/sh200q units/VFunction/_motion units/_unitcam base/Motion libs/speak units/VFunction/_qr_code units/_uwb base/QRCode libs/timeSchedule units/VFunction/_tag_reader units/_v_function base/Stepmotor libs/time_ex units/VFunction/_target_track units/_vibrator base/__init__ libs/urequests units/_accel units/_vmeter base64 libs/vl53l0x units/_acsocket units/_watering btree m5stack units/_adc units/_weight builtins m5uart units/_ameter uos cmath m5ui units/_angle urandom collections/__init__ machine units/_atom_motion ure collections/defaultdict math units/_bps urllib/parse collections/deque max30100 units/_button urllib/urequest comx/lte menu/__init__ units/_cardKB uselect deviceCfg menu/cloud units/_color usocket display menu/wifi units/_dac ussl esp micropython units/_dds ustruct esp32 modules/_grbl units/_dual_button utils espnow modules/_lorawan_network units/_earth utime flashbdev modules/_servo2 units/_env utimeq flow/__init__ neopixel units/_env2 uwebsocket flow/adaptation network units/_ext_io uzlib flow/flowDeinit ntptime units/_fan warnings flow/m5cloud ntptime units/_finger wav/chunk flow/m5ucloud simpleOTA units/_gps wav/wav_player flow/protocol sys units/_hall wav/wave framebuf uarray units/_heart wifiCfg gc ubinascii units/_imu6886 wifiWebCfg Plus any modules on the filesystem >>>