🤖Have you ever tried Chat.M5Stack.com before asking??😎

Categories

  • Firmware updates, Hardware Revisions, New Product info can be found here.

    75 Topics
    826 Posts
    KhanFromNorthK
    You can continue developing on the M5Stack Core2 reliably. The key is to bypass UIFlow entirely and use MicroPython directly through Thonny or VS Code.

  • M5Stack Events

    8 Topics
    31 Posts
    kurikoK
    @Apex574R Does the Userdemo firmware running normally?

  • Wish for a feature that doesn't exist yet? this is the place to ask for it. we will collect all the requirements and enquiry's and who knows ... sometime wish might come true!

    222 Topics
    676 Posts
    R
    I took a closer look and compared M5StampS3A vs M5StampS3 BAT and I must say that it is not possible to do any piggyback for pin mapping at the M5StampS3A level since ESP32-S3FN8 vs ESP32-S3-PICO-1-N8R8 have differences in the number of GPIOs (6 pins error), see the difference table below: [image: 1774204115000-f8a8e80c-1dca-472a-ab48-dac7e6656c42-image.png] So it only remains for M5Stack team to upgrade M5StampS3A for 2/8 PSRAM, i.e. have M5StampS3B version.

  • Forum rules - Announcements - General chit chat (ESP-32, ESP-8266, IoT, Raspberry Pi etc...)

    970 Topics
    3k Posts
    G
    I'm back in now too hurray!

  • Core and Modules info.

    3k Topics
    14k Posts
    H
    Dear all, I am truly wondering, i finally got this combo :Core2 and GNSS (https://shop.m5stack.com/products/gnss-module-with-barometric-pressure-imu-magnetometer-sensors?variant=44017753063681) working. Based on the GNSS Module (https://github.com/m5stack/M5Module-GNSS/tree/main) which does not working, and really helpfull support from Claude, the solution is really simple. But my Q is where did I miss this in the documentation? This works : ``` auto cfg = M5.config(); //cfg.external_imu = true; //cfg.internal_imu = false; //cfg.output_power=true; cfg.serial_baudrate=115200; M5.begin(cfg); delay(1000); Serial.println("And we have started"); // M5Unified handles BMI270 + BMM150 internally if (M5.Imu.isEnabled()) { Serial.println("IMU enabled"); Serial.printf("IMU type: %d\n", M5.Imu.getType()); }

  • Projects Sharing.

    486 Topics
    2k Posts
    M
    Hi everyone, I built Pixel Pets, an open-source virtual pet family for M5Stack devices. It currently supports: Muffin — CoreS3 + Module-LLM, with offline voice interaction Visu — CoreS3 without the LLM module Goo-Goo — Core2 version Pip — StickC PLUS2 / PLUS2 S3 pocket companion The pets have moods, needs, mini-games, sounds, touch/button/IMU interactions, weather and moon-phase awareness, and ESP-NOW friendships. Pip can send treats and gestures to a bigger pet via ESP-NOW. The project started as a father-and-son maker project and is meant to be playful, hackable and parent-friendly. No cloud account, no tracking, no subscription. GitHub: https://github.com/marceld23/Pixel-Pets Demo / project page: https://marceld23.github.io/Pixel-Pets/ I would love feedback from other M5Stack users, especially around hardware setup, flashing instructions and ideas for new interactions.

  • This is the place to discuss driver issues, M5 burner troubleshooting, and development of software compatible with M5Stack

    3k Topics
    10k Posts
    D
    the atompdu2-nb-iot is v1.1 has an io_exp to manage the power/reset of the sim7028, but so far all I found out that it's an M5IOE1, at 0x6f, but no idea how to continue.

  • 259 Topics
    565 Posts
    J
    今日、StackChan がやってきました。 まだ AI Agent との会話がぎこちないし、音楽再生を頼むと J-Pop やビートルズは探せず、中国語の歌しか再生できないけど、なかなか楽しんでます。 [image: 20260502_180601613.JPG]