With arduino library...
It's possible to do?
code examples?
regards
A
With arduino library...
It's possible to do?
code examples?
regards
A
There are two version of M5Stack Fire?
I recently buy a Fire with MPU6050+MAG3110 instead of MPU9250
MPU6050 are old version?
@watson one question, are you sure weight unit are I2C?
I see the back and report GPIO A/B/C...
I buy also this:
https://www.aliexpress.com/item/New-Arrival-M5Stack-Official-I2C-Hub-1-to-6-Expansion-Grove-I2C-Interface-for-Arduino-Blockly/32998974179.html?spm=a2g0s.9042311.0.0.15424c4d4BZ4hA
And I hope this works...
Hi, it's possible to attach at M5Stack FOUR Weight unit and read the weight for each unit?
It's possible to write bin via type C usb?
I need tuo exec code before reset button pressed...
it's possible?
it's hardware reset button or a interrupt generator?
This my version (improved) can you try?
https://github.com/yellowelise/M5Stack-Thermal-MLX90640
My improved version of Thermal unit:
Auto Scale and Configurable pixel block temp display...
any feedback are welcome.
https://github.com/yellowelise/M5Stack-Thermal-MLX90640
@watson
No baud in HardwareSerial but Baud in GPS module config, what is the correct NMEA string to config Serial Baud rate communication from GPS to HOST and what is the correct sentence to ser 10hz frequency?
es. $GPTXT.......
I use tinygps++,
how can I change gps serial boud rate?
and how can I use 10hz sample rate?
PORT C Uart conflict, if I would to setup Serial(2) I need to disable PSRAM :(