Posts made by RoToR

Ich habe ja jetzt fast 2 Stunden versucht das Programm irgendwie wieder angezeigt zu bekommen.

Letztendlich habe ich dann doch noch einen einzigen englischen Hinweis gefunden, der sich mit meinem Problem deckt.

Ich hatte nämlich einen Custom Block verwendet, der sich nicht automatisch lädt und somit das Laden des Programms abgebrochen wird. Es war der Custom Block für den Sensor DS18B20.

Das Erbärmliche dabei ist, dass UIflow keinen Hinweis ausgibt, bzw. dass z.B. ein Custom Block nicht geladen werden konnte bzw. zuvor geladen werden muss. Irgendeine Rückmeldung wäre auf jeden Fall extrem hilfreich gewesen und hätte mir etliche graue Haare erspart ...

Vielleicht hilft das dem ein oder anderen mit dem gleichen Problem.

Hallo Leute,
ich habe ein riesiges Problem.

Habe jetzt zwei Tage an einem Programm in UIflow für den Core 2 gearbeitet (im Chrome Browser) und immer wieder abgespeichert, auch unter anderem Namen.
Heute habe ich das Programm geladen, aber der gesamte Inhalt ist weg.

Die Datei hat noch 66kB, sollte also noch den Code enthalten. Im Editor scheint der Code der Blöcke noch vorhanden zu sein, er lässt sich in UIflow aber nicht mehr öffnen. Hier ein Ausschnitt:

Bin gerade ziemlich am Verzweifeln, da ich mir wirklich zwei Tage lang den Kopf zerbrochen habe, um ein Problem zu lösen.

Wenn ich auf die Python Ansicht wechsle, bekomme ich nur die Initialisierungen angezeigt.
Das Hauptprogramm fehlt komplett.

• Ist das Thema bekannt, gibt es eine Lösung dafür, wie ich das Programm zurückholen kann?
• Ich habe das Programm auch noch auf dem M5Stack Core 2, lässt sich das irgendwie herunterladen?

I found a workaround meanwhile with if-else.

It is not nice, but it´s working:

• I convert the DAC Value into a String.

• Then I check, if it is "None", if yes I send a 0 to the DAC.

• If DAC Value is not "None" I convert it back to integer and send it directly to the DAC.

Hello,

I am working on a simple program.

I receive a value between 0 and 1000 by MQTT and convert it to a digital value from 0 to 255.
Then I want to put it on the DAC channel 0.

But if I want to proceed with the digital value within the main loop I get the error "Can´t convert NoneType to int".

I understand that this is a NoneType, which can´t convert into an integer, but I need to work with the digital value in the main loop, because I have to do some calculations (filtering), which is not possible in the MQTT function.

How can I solve this issue?

@RIDDSprojects

Thank you so much for this example. That´s what I am looking for.
It is not as comfortable as I expected, but it works. :)

@holofloh
Thanks so much for your explanation and ideas!

But I mean, is there no way in UIFlow (Blockly) to make the m5stack core accessable by IP from local network to get some data?
Just only to make the data vissible on internet browser? I would like to show real data, current status of the battery for monitoring in case of grid power loss.

I want/have to use Blockly, because I don´t have much time for programming in Python and I realized already some functions with UIFlow Blockly.

@ajb2k3 I will try it too, later today.

I now found the "remote+" block in UIFlow, which provides the function I am looking for, but it works only with access to external server. So, without internet access it is not working anymore, right?

Didn´t realized EZData. That could be an alternative solution.

But as I understand, internet is needed, which could be a problem for my project.
I want to read out a big battery, which must be accessable even if power from grid (and internet) is missing.

I am not sure how to realize a website to show sensor data.

For example:
I have a m5stack core which measures several temperatures and voltages.
Then I want to open a website on local network, where I can see all the data which are provided by m5stack.

How to start with UIFlow? Just only to show one sensor value on a small website, which is provided by m5stack via WLAN.

I have to convert a float value into decimal for modbus application.
I would like to realize this in UIflow.

Is there any function available or perhaps a program flow code?
Is it in general possible to realize this in UIflow blocks?

Just found an information how to create a custom block with Python.
Perhaps it already exists a m5b file? Otherwise I will try to create an m5b file.

Any other idea, how to convert float to decimal in UIflow?

Added:
I am reading out a smart meter with M5stack and UIflow:

The result is a floating point format value, here 17008.

Converting into decimal is not available in UIflow and converting into an integer value is not working, as expected.
Therefore the second value on display shows nothing (only default text).

Just a short feedback.
I tested now the new RS485 to TTL converter.
It is working well together with the smart meter. Now communication is possible. All voltage levels are much higher.

The COMMU module is rubbish! Should not be used for RS485. I lost a couple of hours to fix this issue.

Now I have the issue to convert the float values from the smart meter into decimal / integer.
Any idea, how to do this with UIflow? is there a function available?

@felmue thanks, I see. They are connected to 3,3V, could be the reason. But I will no more waste my time with this modules. I am testing the other RS485 adapter this weekend and report.
Hopefully they have the same behavior as yours. These values I expected from the COMMU ...

I ordered now at Amazon an external UART/RS485 adapter, which will arrive tomorrow. Will test it on Sunday.

My conclusion up to now is, that the COMMU is unfortunately not suitable for UIFlow, because today I also wanted to test the CAN Bus, but the CAN library is not usable, because it is only for CA-IS3050G Chip, which has only RX and TX.
If I would have the time, I would programm it in Arduino, but that´s not the case, so for me the COMMU modul is rubbish and a waste of time.
It would be really a great module, if it would be supported by UIFlow ...

@felmue, thanks for your measurement.

I don´t understand ...
3,3V and 5V measured on M5Stack are good.

With 120 Ohm differential voltage it`s 200mV, so with load even worse.
Ground wire disconnected, same issue.

I downloaded the test software to M5Stack and took a separate USB power supply, but the same ...

It seems, that there is not enough power on SP3485 chip.
Do I have to enable something?

I already changed the M5Stack and the COMMU, without success.
I will cross change again.

What do you measure without sending a message? I measure 0.57V. Should be much more, when I take a look on the schematic with the assumption, that A/B output is not low-ohmic.

I just tested a new M5Stack and another COMMU module. Same issue.

For RS485 communication I took RS485 unit library. Could this be the problem?

Now I will compare the schematic from RS485 unit with COMMU module.

It is comparable, should not be the issue.

Is there a design issue with the COMMU boards? Mine are from October 2011.
Or are both COMMU modules broken?

What else could I do?

Hi,

I want to use the RS485 from the COMMU module.

But I am wondering why the differential voltage between A and B from RS485 signal is so small (800mV).
I tried to connect it to a smart meter, but communication with M5Stack Core and COMMU via modbus protocoll isn´t possible.

Configuration, software and signal see pictures. What´s wrong? I have no more ideas. So I assume, that voltage leves are to low.

Thanks ajb2k3, that´s what I am doing.

But anyway, I have to arrange the labels on the M5Stack Screen somehow before.
With over 130 labels it is not possible to pick it when they are overlapping.

Perhaps I am misunderstanding something completely, but I didn´t find any setting or solution until now.

More screen pages for M5Stack Core in UI window would be very helpful.
We have to place more than 130 text labels on different screen pages.
I would like to have for each page I am creating a separate screen, so that I am able to arrange all the labels.

Probably it could be also very helpful to enable and disable a layer number of the labels.
So, if I give all the labels on one page the same layer, it would be possible to disable all at once by a "disable layer" function in program code.

Hi,

I just started programming the M5Stack with UIFlow.
I want to display a lot of different sensor data on different screens on the M5Stack Core.

So I have to place a lot of text labels on the M5Stack screen, which I will hide and activate, if I switch with the button to the next screen.

Now I have the problem, that all the text labels, e.g. from page 1 and page 2, are placed on different positions on the screen, so that they are overlapped. It is not possible now arrange the text labels which are behind other text labels.
Would be possible by setting X and Y from the label, but I lost the overview at around 130 text labels on the screen.

Is it somehow possible to have more than only one screen on the UI window, to get a better overview of all the different text labels?

Or is there another solution to arrange different pages on the M5Stack Core?

I am using latest UIFlow version.

Thanks for your help!