Posts made by Mati

Funny bug, while plaing with Atom Lite and Oled when GUI is hidden all elements with i would like to add or move is going to be delated ...
https://ibb.co/ryfQjdb

hey @m5stack
please fix broken link
https://docs.m5stack.com/#/en/uiflow/hardware/watch-dog-timer

@m5stack thx, maybe some day uiflow will be able to support new HW at rls day ;)

@m5stack when we gonna see UiFlow with zigbee Init and COM ?

hmm there is BLE in advance:

Hey,
since we have more and more users maybe its time to make dedicated Europe and US uiflow server's ?

@zontex said in [M5Paper] UiFlow support:

Guys, good news - the estimated release of this support is by the Chinese new year holiday which will be in approximately 2 weeks from now :)

nice to hear ! I am disappointed by the fact that the product appeared in the store and only after more than a month does it receive the advertised functionality.

Nice update, where i can find how to use "M5Stack Device Platform - Beta" ?

Still waiting for M5Paper =)

@se said in Core2 Port I2C Not Working:

Felix thanks for the suggestion. You were absolutely correct version 1.7.0 resolved the problem.

Now in 1.7.1.1 this problem was fixed.

@gaviota said in UIFlow 1.7.1:

@m5stack

@ove said in UIFlow 1.7.1:

I installed UIFlow_Core2 version v1.7.1_core2 on my Core2 and now I have no power on port A.

If I add "power.setBusPowerMode(0)" in the Python tab before any Units are initialized the power is returned but I can not do this with blocks.
The power is restored until the Core2 is reset.

I detected a similar problem with the Core2 and UIFlow 1.7.1

Testing with the ENV- and the TVOC/eCO-units at port A of the Core2 drives it into the I2C-error message "I2C bus error(19)". After rolling back the Core2 to UIFlow 1.7.0 these units works with the Core2.

I think there must be a I2C-bug in UIFlow 1.7.1 for the Core2, at least for port A.

Yep check my finding
https://community.m5stack.com/topic/2663/core2-uiflow-bottom2-support/14

in my case 64GB is passing test as well.

Since @Zontex is away maybe @lukasmaximus or @m5stack could give us some update.

@ove said in [Core2] UiFlow - BOTTOM2 support:

If you are using firmware version 1.7.1 then I suggest trying version 1.7.0 because in 1.7.1 the power to external devices are off when the device is powered on and even if you use the "Set bus power mode" block it is trying to initialize your "Units" before they get any power and this will cause problems like this.
It is possible to enable power before the Units are initialized if you switch to the python tab... but this should be fixed in a new firmware release.

yep rollback to 1.7.0 bring back the i2c. Thx @Ove
so we have a big issue inside 1.7.1 ...

Well did it already on solo mode ic is dead as well...

Fun fact ... after a while when all was working my env2 or tvoc is unable to communicate ....

Sounds like i will contact support ...

@felmue said in [Core2] UiFlow - BOTTOM2 support:

Hello @Mati

I have received my M5GO2 bottom yesterday. @Zontex was correct, UIFlow support for M5GO2 is already in M5Core2 firmware 1.7.1. What is missing is enabling the 5 volts boost IC in M5Core2. W/o that the RGB LEDs do not have power. This works for me:

Cheers
Felix

Great find ! big thx @felmue

Lets hope @Zontex will fix this. core2 section is missing https://docs.m5stack.com/#/en/uiflow/hardware?id=power-m5stack

@vgamlc check this one, so far my Core2 + bottom2 fail big time ..
https://forum.m5stack.com/topic/2663/core2-uiflow-bottom2-support/6

@world101 yep also this is a bit strange we have SPK Hat for Stick but there is no standalone SPK. I think all core units got own internal SPK.

@powersoft since we dont have so many M5Paper support yet check this one:
https://github.com/ayoy/fontedit/tree/v1.1.0

hey
well you can ask the question here or vote on my post as well
https://forum.m5stack.com/topic/2647/m5paper-uiflow-support/9