[Solved] M5 Burner Firmware Option Update

[GACHAPO]

For the MK1 (no case) use cam0.02

This is my camera;

I have UIFLow-v 1.2.3-en loaded and I have setup an IP address but nothing is loading.

The options I have are on the image I loaded - I see no cam0.02?

Thanks

[ajb2k3]

@gachapo There should be an option in the top dropdown box to select it.

Click on the box next to firmware

[ajb2k3]

Click on the M5Flow-v1.2.1-en and a box will drop down, scroll through the list and the cam firmware is near the top.

[GACHAPO]

That's my point - there's nothing more than the image I sent.

The only choices I have are on the left and the only drop down boxes are at the top and relate to the COM port and Baud rate??

[ajb2k3]

@gachapo said in M5 Burner Firmware Option Update:

That's my point - there's nothing more than the image I sent.

The only choices I have are on the left and the only drop down boxes are at the top and relate to the COM port and Baud rate??

Sorry No image has appeared.

[GACHAPO]

[ajb2k3]

@gachapo said in M5 Burner Firmware Option Update:

Um, something is not quite correct there!
@watson

[ajb2k3]

An alternative is that you can download the source code and compile it yourself.

[GACHAPO]

I could, if I knew how.

I was hoping somebody would know why I cant use the burner?

[m5-docs]

Hello @GACHAPO @ajb2k3,

Now, you could burn camera board firmwares through the lastest m5burner. Please download the lastest version from www.m5stack.com

[GACHAPO]

@watson Thanks for coming back to me.

I have downloaded the new version and I have tried all three versions of cam software. None of them go into AP mode so I can browse to them. I have the Camera without the case so can you please let me know which software I use and how I get it sdet up beyond download.

Thanks

[m5-docs]

@gachapo Download a new one from www.m5stack.com, then burn ESP32CAM-v1.0.0. Your board is named ESP32CAM.
Here's the doc for it.
https://docs.m5stack.com/#/en/unit/esp32cam

[GACHAPO]

That's great thank you - works.

Is there any documentation about how to assign your own IP address to the camera please?

[m5-docs]

@gachapo Do you mean this doc?

https://docs.m5stack.com/#/en/quick_start/m5camera/m5camera_quick_start

[GACHAPO]

Hi,

I've see that document and youtube video. I just need to know how to move the camera from M5stack AP connection on 192.168.4.1 to an assigned ip address by myself like 192.168.1.131?

Thanks

[ajb2k3]

@gachapo you need to recompile the code is ST mode and upload to cameea

[GACHAPO]

@ajb2k3 Thanks - Is there any documentation you can point me to please?

[ajb2k3]

@gachapo only the official espressiv and espcam docs

[m5-docs]

@gachapo At main.c file

[GACHAPO]

Hi - Can't find main.c file. I've been into the downloaded fiirwares and I can't see it. Where am I going wrong please?