Hello @GAZZZ6

I didn't realize you are looking for an UIFlow solution.

UIFlow has a configuration flag which allows to connect via modem instead of WiFi. However that option only seems to be implemented for M5Stack devices with can stack COM.X modules.

0_1693840640787_UIFlowConfigCOMX_20230904.png

I've tried to enable that option for M5Station, but it is ignored and the connection goes through WiFi still.

Thanks
Felix

That question of which sensors to use is dependent of environmental conditions.
In My case an RPI acts as an MQTT server (because I have one available), controllers capture the data from the sensors and send them Over WIFI to the MQTT on the RPI using very simple UIFLow code.

This all depends on wifi range. I do have a sim module to review but I have been struggling to understand and find suitable SIM cards for MQTT/IOT use.

@M5Stack team: I am looking for any ressources / tutorials on how to use remote+ in uiflow. I do not find any project on hackster.io. please provide a test case tutorial sothat people may use the graphical interface...
Has anybody used it successfully?

@zane_shus said in Python Module when using Blocky:

I am trying to use the FLow/Blocky interface to read a remote ICS file. It needs a python module. How do I do this please? I get a error "no module names icalendar"

It seems like you're encountering an issue with the "icalendar" Python module while trying to use the Flow/Blocky interface to read a remote ICS file. The error message "no module named icalendar" indicates that the required Python module is not installed in your environment.

@ajb2k3 Oh, I was afraid it would be in depth. Thank you, I'll read through it.

The support team disassembled a cable and the pairs are:

Red and black green and yellow

Try checking if the zip file is properly formatted and all the required files are included. Sometimes, a small glitch can cause unexpected errors.

You can find all the juicy documentation and functions for UI Flow in the Help section of the app. Just navigate your way there.

There is generic information on the PAHubs product information page.
An almost identical project was on my list for last week but didn’t get around to it

I did rewiring for DS-sensor grove-connector, works perfectly and was easiest.

Did anyone find a place to order the battery for the M5stick CPlus?

Have you tried following the various instructions on how to put the CoreS3 into boot mode?
This video show how to do it on the AtomS3 and is exactly the same method for the CoreS3 (video will be available this Saturday)
https://www.youtube.com/watch?v=2w85U4XwGj4&t=8s

It would appear that the UIFlow2.0 server is currently offline.

@iso15693 unfortunately no I don’t know, sorry

@felmue That was helpful, thanks!
I added this to my platformio.ini:

build_type = debug monitor_filters = default ; Remove typical terminal control codes from input esp32_exception_decoder ; Decode the backtrace

Hello @felmue,
I know the part M5CoreS3 Library and the examples. With some effort I would get it working for the Arduino IDE, but this means a lot of manual work.
I am looking for a working environment for easy examples.

Hello @jkeyser

BTW: the LTE modem SIM7600G also has a GPS, but you need to add an antenna.

Thanks
Felix

@xeon which makware?