no hardware > power> powerOff in (uiflow 1.8.1)

Re: Is the https://flow.m5stack.com/ running?

@ganeyvim Type B

All my tpe A (red connectors) units , work with both the core2 and the C plus.
The type B (black) only work with the C plus.
Do I need some sort of adapter, or another solution?
Thanks

Please advise me on this.
I have a core2 which I use with the UI flow
All my type A (red) units (heart, env, air quality), are fine
The port B type (black) units (rf, buttons, rgb, ir)connect, but are not read.
What are my options?
Thanks

@felmue
Thanks for taking an interest. I am using the default libraries and samples without any mods or "improvements on my part"

Arduino: 1.8.15 (Windows 7), Board: "M5Stack-Core2, Enabled, Default (2 x 6.5 MB app, 3.6 MB SPIFFS), 240MHz (WiFi/BT), 115200, None"

In file included from D:\My Documents\Arduino\libraries\M5Core2\src/M5Core2.h:76,
from
D:\My Documents\Arduino\libraries\M5Core2\examples\Basics\display\display.ino:13:
D:\My Documents\Arduino\libraries\M5Core2\src/M5Display.h:117:12:
error: 'vector' in namespace 'std' does not name a template type
std::vector<DisplayState> _displayStateStack; ^~~~~~ D:\My Documents\Arduino\libraries\M5Core2
etc etc

The typo was just in this post.
The include is definitely #include <M5Core2.h, and the compile error is
" Error compiling for board M5Stack-Core2"

@felmue

Have a newly developed Arduino M5Core2 problem.
I hope the following is clear enough.
Uflow sketches for Core2 and stick c plus ..... NO PROBLEMS
Arduino programs for Stick C plus ..... NO PROBLEMS
Arduino for Core2 with #include <M5Stack.h> compile and run , but no display on lcd
Arduino for Core2 with #include <M5core2.h> = Error compiling for board M5Stack-Core2.
Have reinstalled all Arduino libraries and M5 software
Any help would be very appreciated

Have now tried everything (arduino,flow, MicroPython.
The best I got , was a very faint high pitched squeak.
Isn't this device supposed the have a buzzer?
I have no such problems with the core2.
Would welcome any help, before sending it back.

Or some other method wifi or usb (something lik adb)?