If you erased the firmware you now need to burn the latest UIFlow firmware for it to work
ajb2k3
@ajb2k3
I tried to fill this in but easily distr........
Ouuu Squirrel!
Posts made by ajb2k3
-
RE: Won’t turn on
-
RE: Webburner & Plus2
You need to check your computer setup as something is missing or not accessible. Also web burner only works with chrome browser
-
RE: SensorHub
Any controller will work, I have mine send to an MQTT server hosted on an RPI4.
100 may work but you will run into power issues.
If you have more then 1 I2C sensor with the same address, you will need to use the PaHub for the up to 6 sensors .
You can connect more then 1 hub to the I2C bus but you will need to make sure you have different Hub address.
-
RE: UiFlow 2.0 discuss(how-to, bug, feature request or sometings)
@kris said in UiFlow 2.0 discuss(how-to, bug, feature request or sometings):
@iamliubo Why only DAC hat is available with m5staick? No more hats?
Because it take time to write and develop the code so that it doesn’t cause breakers in other code
-
RE: Need some help with debugging
The joys of debugging Micropython. The errors aren’t always random. The secret is to count the actual line of code and ignore the empty lines
-
RE: Component recommendations: Rotate a servo using signal from a linear encoder
For a Start M5Stack uses Micropython and so you already know how to program it
What kind of Linear encoder are you thinking of
-
RE: [Core Ink] Unwanted display refresh on startup
You cant avoid the refresh/clear screen on start up because its part of the screens function and internal firmware not controlled by the ESP32.
-
RE: Is there a way of moving a label in UiFlow2
Use the set table XY block to move the label in code
label0.setCursor(x=0, y=0)