M5stickC Plus 2 connecting SD card Module not working
-
I'm trying to run NEMO or Marauder using an SD card module at 3.3V made specifically for the ESP32 but even tho i followed the right wiring (Displayed below) Neither of them seem to be able to initialise my SD card.
Wiring:
M5 --> SD
GND --> GND
3.3v --> 3.3v
G0 --> CLK
G26 --> MISO
G32 --> MOSI
None --> CS(Wiring found in https://community.m5stack.com/topic/5290/my-m5stickc-plus-can-t-read-micro-sd/3)
Does somebody know what the issue might be?
-
@wh1t3_01l CS must be connected somewhere. I don't know the answer, but I know that without CS you can't have the SD card breakoutboard working.
-
-
Here is how I made it work:
- CS Connects also to GND in M5.
- Some Card adapters requires 5V to work (bigger ones)
- Card must be formatted as FAT32
- SD card capacity <=32G
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login