unable to flash after loading arduino tetris
-
gray m5 core
Win7 - loaded tetris from arduino UI successfully. no trying to re-flash anything from arduino or m5burner it looks like the tetris load does not let the bootloader start. on any load attempt the system resets and then the tetris start screen appears. this repeats till the loader times out trying to connect. forcing a reset via the power button has no difference than the usb induced reset
-
from arduino serial monitor @ 115200 baud :
==========================
rst:0x1 (POWERON_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6352
entry 0x400806b8
M5Stack initializing...OKso the serial port seems to be working OK - but loader never connects
-
solved...sort of ... looks to be win7 problem - works fine on up to date win 10
-
@daavery You can try more times on win7, maybe just baud rate issue or USB COM / cable issue.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login