Hello

I found some with BLE Support.

Could this BLE also be used with the other modules so that all support BLE?

regards

Alkaline

0_1653488063689_BLE-2022-05-25_14-58-48.jpg

Hi there! all UVC are supported

Hi there We appreciate your feedback! can u check one more time now

@uecken Replace the text box containing the URL with an unescaped text box. That way, the URL won't get truncated. See also this post: HTTP GET query parameters

what's the voltage when the sun comes out?
you would be better of using a VMeter unit instead of the adc to measure voltage as under high sun it could be overloading the 3,3v max input pin causing the reset.

https://shop.m5stack.com/collections/m5-sensor/products/voltmeter-unit-ads1115

alt text

It appears this bug is fixed, not in the firmware, but in the latest version of UIFlow!

The V2 is designed for that however there are a few issues you need to overcome.
1, it does not connect to the pi like a pi camera.
2, there is a steep learning curve when it come to programming.

if you were looking for a quick fix for image recognition then I'm sorry it cant help. I have been struggle to understand it for a long time and I still have the V1

Unfortunately due to the component crises the RPI issue is bad however wave share do a better resolution camera replacement to the official RPI camera2

@wsanders SOLUTION: Use "Original Network Function" blocks instead.

Many thanks for the info. I ventured into all the other modes and will experiment with the Arduino mode until I'm more familiar with this "cutie".

But I need an answer about the loss of the touch function in ALL modes. I'm about to return it.
I'm guessing its not a hardware problem but software. I did the erase and reloaded the Core2 firmware, but still no touch.

Help appreciated.
Anxious to move on to MicroPython.
Bo W4GHV since '54

This was caused by a missing double quotation mark in a file name in an "Execute code" block.....

@wsanders I just followed the install instructions to install Python3 in OSX
All you are doing is adding a list of folders that tell the terminal where to look for python 3.
Something like this guide works fine: https://www.educative.io/edpresso/how-to-add-python-to-the-path-variable-in-mac

Then once the variable is set you use python3 instead of python when issuing commands.

@wsanders Yes, the SSID's need to be changed as far as I'm aware, the issue is with Micropython.

PROBLEM SOLVED

At startup :
if flag 'power_lost' is True:
the external DS3231 is set with pre-determined datetime (adjust by hand)
next the built-in RTC is started with the datetime from the DS3231

if the flag 'power_lost is False:
the built-in RTC is started with the datetime from the DS3231

During the main loop displaying the datetime from the built-in RTC.

I put a short video in the images folder inside the dropbox folder (see the link in my post above).

@ikanode What do you mean by "Those are the incomplete instructions that don't work for Web IDE"
Those were written for the WEB IDE!

WEB USB host mode?
experimental web browser system that isn't supported.
Wifi SSID screen is used to set the wifi access point and password on a wifi network this only comes up if you didn't set the skid and password when flashing using M5Burner.

After the said and password is set you be been shown the API code which need to be set in uiflow in order for uiflow to connect.

There is only one online server at present and its behind the great firewall of china which sometimes causes connection to be dropped especially with so many people trying to connect.

This book is not complete but it may answer some more questions.https://github.com/Ajb2k3/UIFlowHandbook/blob/master/UIFlowhandbook.pdf

No because the Stick does not have "Host mode" so cannot have USB drives connected to it.