To whom it may be interested
I modified native arduino M5STACK library to suite both M5STACK and ODROID-GO.
Look in the examples folder.
Also read comments in M5Stack.h
Tested with VisualMicro for Visual Studuo
https://yadi.sk/d/0wo7ympO3Zc6RT
0_1533201659864_odroid.jpg
0_1533202359391_odroid1.jpg

So after all that work, the provided driver does not work.

Hi @ajb2k3,

Are you actually using Arduino IDE version 1.6.5 from 2015 - or is that a typo ?

From your comments, I am not sure what issue you have found.

Depending what sketch you are trying to load will dictate what libraries will need to be referenced at the start of the sketch, such as those you list.

If you are having problems loading the examples, perhaps pick one and outline some specific details including error messages.

@dimi 在 FACES UI Lessons question 中说：

The information in the previous lesson, today is not relevant.

So, these lessons only misinform us. So I ask, what is the use of them?

It is better to rewrite or delete them.

@ajb2k3 在 Project Element E 中说：

Brushless drivers are ok for the Brushless motors but the same board needs to replace a burned out driver in an old bike.

The old bike has a 200W motor run at 36v for a total of 5.55555) amps and the FQA160's are rated at 160amps.

However, I must say that those ESC's do look sweet.

In this case, consider something like this:

alt text

Is way cheaper.

Can we get some clarification on this like where the logo is stored and how its created?

So, I found my mistake, I put the 3 files in the SD card while it was put in the system file. first problem solved but now he still does not want to connect to my PA, he connects and then disconnects 5 seconds later

Great Job!

Hi

Is there any update on the new 868 and 915 modules.

Just waiting for them.... :P

@donck 在 Review "BATTERY" 中说：

(WiFi was not setup).

Is WIFI off by default?

@n37 Hi,

The lesson also lists a github link which has the files you need. I've copied it below....

The exe file is located in: ConsoleApplication1\obj\Release

https://github.com/dsiberia9s/ImageToCode