[Core2] Home Assistant remote



  • Hi there!

    I just wanted to let you know that I am working on a Home Assistant remote control using an M5Stack Core2. My aim is to control the smart appliances I have (lights, blinds, and music) via the M5.

    The software is written in micropyton using the micropython firmware developed by M5Stack. For the interface I use LVGL which is available by default in the M5Stack Micropython builds, and for the connection with Home Assistant I use the MQTT protocol.

    There is still quite some work to be done, but I have a working interface which can control the light's states and attributes. I have some plans of my own to improve this project as it is now, but I would also like to know if you have any good suggestions on how to improve my project.

    The code is available on GitHub (link below) and I encourage you to have a look/install it on your own device. At this moment I don't have instructions on how to add this to your device just yet, but I hope to make it soon!

    https://github.com/hugobloem/M5Stack_HomeControl

    Cheers,
    Hugo


  • M5Stack

    cool !