GoPlus2 UIFlow Block



  • I am trying to use Port B on a GoPlus2 module, attached to a Basic M5Core. The block to write to the Port appears to be

    0_1613239675894_742130c0-0708-49d1-a5ee-2fe4d2c2b8be-image.png

    I had expected to see a Set Block abd cannot understand how to utitilse this block to achieve a write.

    Can anyone help?

    Allan



  • The only thing I can think of is to do something like this using a set variable.
    0_1613302856346_Screenshot 2021-02-14 at 11.40.28.png



  • I also connected GoPlus 2 to M5 Basic.
    Next, I connected Relay Units to PortB_1 and PortB_2 respectively and confirmed the operation.
    UIFlow Block is based on the image posted by ajb2k3_san.
    I didn't have to use a block of Relay Units.
    0_1618134404725_M5stack Basic with GoPlus2.png
    0_1618134468368_PXL_20210411_094123026.jpg