How to use two ENV units with PaHUB (UIFlow)

liemph

@liemph Sorry, I have solved my problem by watching Lucas video on YouTube.

lukasmaximus

Glad the video helped ;)

GrafoLabs

@liemph Could you share the link to the video, please?

Pepsi

@grafolabs
I think this is the video
https://youtu.be/nMsCwqCE5c8

It is clear in explaining the PaHUB with UIFlow

jollawat

Hi Guys
I have some further question, what about M5Stick C + ENV HAT + PbHUB connect together?

liemph

@jollawat There is no problem. The pins used for the Hat (ENV HAT) and the ones used for the grove port (PbHUB) are different.

jollawat

@liemph I tried connect and program by UIFlow it but there are some error after run on screen said “please remove ENV hat” when we add PbHUB into list.

liemph

@jollawat I did not get it. Please post also your configuration (the connection between Stick-C, Hat and Unit) and your code.

liemph

@jollawat I do not have any ENV Hat, but I have a PIR Hat, and I tried to reconstruct your problem. I connected my PIR Hat and my PbHub (to Port A) of my Stick C. Then I connected my Light Unit to Port0 of my PbHub. Then I programmed using UiFlow to show the measurement results of both the PIR Hat and Light Unit. It worked well. Please see below, the code snapshot and list.

liemph

liemph

from m5stack import *
from m5ui import *
from uiflow import *
import hat
import unit
import hat

setScreenColor(0x111111)
pbhub0 = unit.get(unit.PBHUB, unit.PORTA)

hat_pir0 = hat.get(hat.PIR)



label0 = M5TextBox(13, 8, "PIR Hat", lcd.FONT_Default,0xFFFFFF, rotate=0)
label1 = M5TextBox(12, 63, "PbHUB", lcd.FONT_Default,0xFFFFFF, rotate=0)
label2 = M5TextBox(34, 34, "0", lcd.FONT_Default,0xFFFFFF, rotate=0)
label3 = M5TextBox(0, 83, "+Light Unit", lcd.FONT_Default,0xFFFFFF, rotate=0)
label4 = M5TextBox(26, 109, "0", lcd.FONT_Default,0xFFFFFF, rotate=0)


while True:
  label2.setText(str(hat_pir0.state))
  label4.setText(str(pbhub0.analogRead(0)))
  wait(1)
  wait_ms(2)