Update m5Stack to 1.3.2
-
I can see the m5stack on my windows 10 machine at COM11 with the correct driver. When I try to burn the new software I see the following which seems to suggest that m5burner (or some other component) cannot .. any ideas? Thanks!
- Command:
--chip esp32 --port COM11 --baud 921600 --before default_reset --after no_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect 0x10000 application_0x10000.bin 0x1000 bootloader_0x1000.bin 0x1f0000 fatfsImg_0x1f0000.img 0x8000 partitions_0x8000.bin
===================================================
[25524] Failed to execute script esptool
Traceback (most recent call last):
File "esptool.py", line 2849, in <module>
File "esptool.py", line 2842, in main
File "esptool.py", line 2549, in main
File "esptool.py", line 213, in init
File "site-packages\serial_init.py", line 88, in serial_for_url
File "site-packages\serial\serialwin32.py", line 62, in open
serial.serialutil.SerialException: could not open port 'COM11': PermissionError(13, 'A device attached to the system is not functioning.', None, 31)
esptool.py v2.5.0
Serial port COM11
- Command:
-
Check your usb cable, sometimes the cables dont work.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login