M5 Dial - Port issues
-
Hello everyone,
I am new to the M5 Stack ecosystem and currently using the M5 Core Ink and M5 Dial. The M5 Core Ink works fine, but I am facing some issues with the M5 Dial. After successfully setting up the project initially, I encountered problems on the second day. When trying to update the project, the port keeps appearing and disappearing continuously. The device was on my table for both two days. The port is not damaged (should not be!)I've tried erasing, reflashing, and reconfiguring, but none of these approaches resolved the issue. Occasionally, pressing the StampS3 button on the back, connecting the cable, and then pressing the restart button allowed me to upload the code temporarily. However, after a few seconds, the port drops again. If I skip pressing the restart button, the device connects, but uploading or running code is impossible.
Does anyone have suggestions or solutions for this? Could I be missing something in the setup process?
Thank you!
-
is latest firmware loaded to it via M5Burner?
-
@robski Hi, Yes. I tried both v2.4 and also previous versions (e.g., v2.2). I am using UI Flow 2 online with Chrome on Windows. I tried both the burner online and the desktop version.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login