K-meter custom firmware - will pay for some code.
-
Hi All,
I am working on a project and have a wish to have custom firmware for the k-meter ISO unit to use the broken out pins on the board to measure the RPM of a motor.I am currently measuring engine speed using a Hall effect sensor and interrupts on ESP32 but would love to move this hardware onto the kmeter ISO board and have the RPM value available over I2C.
Ive had a look at the code here https://github.com/m5stack/M5Unit-KMeter-Internal-FW and dont quite know where to start or even if this future will work.
I'll happily pay a small amount to anyone that can help with this.
Regards,
Mike.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login