M5paper USB mode
-
Hey there,
How can I turn my m5paper to usb Mode. I tried to burn both uiflow and factory test. On both thonny tells the device is busy. -
You use M5 Burner to burn firmware
-
Thanks for the reply, so I can't performe something like that on the m5paper?
Thonny with m5stack:
https://youtu.be/YEQPAK609Uo?si=dlmyWouOBeYbLjrE -
@alwa123 Yes, you use M5Burner to Upload the latest UIFlow Firmware to the M5Paper, Open Thonny, set the port to the M5Paper, Se mode to Micropython generic and then connect.
Once connected you will need to hit CTRL+C or another combination that will be show in the shell to interrupt the running program and get access to the REPL command.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login