Unable to upload form Arduino to Cardputer
-
Hi,
The Cardputer is recognized by Arduino "ESP32S3 CAM LCD" when requesting board info.
I think thi sis the reason, I am unable to upload to the Cardputer:
"Sketch uses 1119941 bytes (85%) of program storage space. Maximum is 1310720 bytes.
Global variables use 53516 bytes (16%) of dynamic memory, leaving 274164 bytes for local variables. Maximum is 327680 bytes.
esptool.py v4.5.1
Serial port COM12
Connecting....A serial exception error occurred: Write timeout
Note: This error originates from pySerial. It is likely not a problem with esptool, but with the hardware connection or drivers.
For troubleshooting steps visit: https://docs.espressif.com/projects/esptool/en/latest/troubleshooting.html
Failed uploading: uploading error: exit status 1"I am using M5Stack 2.0.9 and tried 2.0.8, too, without success.
What am I doing wrong?
I can upload the existing projects from M5Burner, but I am unable to upload my own project.
Please help.
-
see here, yesterday;
https://community.m5stack.com/topic/5918/m5cardputer-com-is-reading-it-as-dfrobot-beetle
-Terry
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login