@falbriard I'm having similar issues. I have not changed my password but I can not log into UIflow2 either. Forum and Uflow1 works.
Looks like there is an issue with UIflow2 site. I know the recently fixed bugs in 2.1.8 firmware, so site may be down for bug fixes also.
I plan to keep trying every hour or so.
Logins to M5Burner also seem to be affected.
@RBOUMAN58 Totally Agrre. Very dissapointed in M5Stack applications.
Seems new releases are filled with bugs with no way to access previous working versions. Not to mention being totally locked out today.
Hey M5Stack Team, any chance on getting an actual app instead of cloud based solution?
Thank you kindly.
@RBOUMAN58 Totally Agrre. Very dissapointed in M5Stack applications.
Seems new releases are filled with bugs with no way to access previous working versions. Not to mention being totally locked out today.
Hey M5Stack Team, any chance on getting an actual app instead of cloud based solution?
Thank you kindly.
Logins to M5Burner also seem to be affected.
@falbriard I'm having similar issues. I have not changed my password but I can not log into UIflow2 either. Forum and Uflow1 works.
Looks like there is an issue with UIflow2 site. I know the recently fixed bugs in 2.1.8 firmware, so site may be down for bug fixes also.
I plan to keep trying every hour or so.
I had a working program in V2.1.6 using Power.getBatteryLevel() for both CardPuter and M5StickCPlus 2.
After upgrading Firmware to 2.1.8 on the device and UiFlow2, the function only returns 0,
Is this a known bug?
@lbuque for some reason, the values in my unit were way off when I received it and it did not work. Resetting the values got the unit to work. Not sure what corrupted the values.
@toothlessboots Here is an example program where I use I2C commands to talk to the MiniJoyC hat
https://uiflow2.m5stack.com/?pkey=4b2548481e1644aa8a0ccc88ca8f7859
Turns out the calibration values stored on the MiniJoyC were all out of whack.
I created programs to show and set the calibration values usin raw i2c commands
Show: https://uiflow2.m5stack.com/?pkey=4b2548481e1644aa8a0ccc88ca8f7859
Set: https://uiflow2.m5stack.com/?pkey=165277eeb4364ab9be0d843ede823559
I have written a program to set the calibration values for others having the same issue where the MiniJoyC calibration seems to be off.
https://uiflow2.m5stack.com/?pkey=165277eeb4364ab9be0d843ede823559
@lbuque Would you mind running this code and let me know what the calibration values are for your MiniJoyC?
https://uiflow2.m5stack.com/?pkey=4b2548481e1644aa8a0ccc88ca8f7859
I want to set mine to working values.
It would be much appreciated.
I figured it out, the calibration values were all off.
I reset them to 0x0000 min, 0x1000 max, 0x0800 center and everything is working!
What a PITA.
@lbuque , Thanks for your reply. It made me dig deaper to find out what the issue was.