Topics created by oviking99

I've successfully flashed the FACES-Firmware, using this command line

esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 460800 write_flash -z 0x1000 ./m5stack-micropython-tft-repl-v1.0.bin

After this, I got this prompt:

0_1705265747985_faces-mpy.jpg

The OSError is due to a missing main.py. After adding this with mu-edit, the error no longer occurs.

The REPL is also available on the serial interfaces, accessing it with tio /dev/ttyUSB0

Maybe my response comes like 'mustard after the meal' but anyhow. I just got a FACES set delivered. Using the M5Burner I flashed the latest UIFlow firmware.
Using the Thonny app (under MS Windows 11) I was able to use REPL.