@m5stack I have the same problem. I downloaded sample blocks for the UnitCam + M5Stack from the UIFlow. These look the same blocks as used in your video in the product page. When I push Button-A, the blue LED on UnitCam flashes twice, but nothing happens if the Button-B is pushed. I am not familiar with “M5 cloud”, but how can I make sure if the captured images are uploaded the right place? That would be great if you could share with us how the sample program works as well.
Best posts made by nigauriko
-
RE: UNITCAM Problem
Latest posts made by nigauriko
-
RE: UNITCAM Problem
@m5stack I don't know why but it finally worked after several runs from the UIFlow. I didn't change anything, but it seems to be quite sensitive to the WiFi connectivity. Now I can see interval images on the camera.m5stack.com/timer-cam/...
-
RE: UNITCAM Problem
@m5stack I have the same problem. I downloaded sample blocks for the UnitCam + M5Stack from the UIFlow. These look the same blocks as used in your video in the product page. When I push Button-A, the blue LED on UnitCam flashes twice, but nothing happens if the Button-B is pushed. I am not familiar with “M5 cloud”, but how can I make sure if the captured images are uploaded the right place? That would be great if you could share with us how the sample program works as well.
-
M5Camera power switch?
Hi, I purchased an optional battery for M5Camera and attached it after removing the rear panel. It actually works well, but I cannot turn off the power by the reset button. Does anyone show me how to turn off the M5Camera with optional battery? Or I cannot turn it off? Thanks!
-
M5camera optional battery
Hi, I purchased an optional battery for M5camera and mounted it on M5camera by soldering two wires. It works well, but I cannot find how to turn off the power. I tried double pushing to the side switch, or kept pushing it more than 6 sec, but it never turned off and still saw the red LED inside on again. Does anyone know how to turn off the power?