The project compiles fine, but fails to flash, failing with the following. Has anyone encountered and resolved this?

Building in release mode
Retrieving maximum program size .pio/build/m5stack-timer-cam/firmware.elf
Checking size .pio/build/m5stack-timer-cam/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM:   [=         ]  11.6% (used 38052 bytes from 327680 bytes)
Flash: [==========]  96.0% (used 1006333 bytes from 1048576 bytes)
Configuring upload protocol...
AVAILABLE: cmsis-dap, esp-bridge, esp-prog, espota, esptool, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa
CURRENT: upload_protocol = esptool
Looking for upload port...
Auto-detected: /dev/cu.usbserial-59527C0548
Uploading .pio/build/m5stack-timer-cam/firmware.bin
esptool.py v4.5.1
Serial port /dev/cu.usbserial-59527C0548
Connecting....
Chip is ESP32-D0WDQ6-V3 (revision v3.1)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
Crystal is 40MHz
MAC: b0:b2:1c:60:bf:b0
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 460800
Changed.

A fatal error occurred: Unable to verify flash chip connection (No serial data received.).
*** [upload] Error 2