我昨天託一位同事親到實體店買少量 m5stickC,但他撲了個空,他向鄰近的商家查詢,一位商家阿姨回了一句,這是「無人實體店」。 不會是吧?
我們是很認真的按照貴公司的回覆及指示,誠意地安排專人親到實體店購買,結果什麼都買不到!!!
不太好的體驗。
我昨天託一位同事親到實體店買少量 m5stickC,但他撲了個空,他向鄰近的商家查詢,一位商家阿姨回了一句,這是「無人實體店」。 不會是吧?
我們是很認真的按照貴公司的回覆及指示,誠意地安排專人親到實體店購買,結果什麼都買不到!!!
不太好的體驗。
我託一位同事在官網買一支 m5stickC,而收件地址在香港,
但竟然從新加坡寄送過來,用了 15 天(半個月)另加運費。
但有一位居住深圳的日本朋友,親身到華強北實體店購買,往返花了 1 個小時。
我的問題是:
貴司總部在深圳,購買者在深圳/香港,為什麼從新加坡出貨
(明明我與 m5stick 的距離就是一小時生活圈內,但卻等待了 15 天 ?)
我同事之前問過(但沒有回覆),可否給予「深圳」或「香港」的實體購買店地址 ?
(我想即買即用,因為不想等,不想額外運費)
I'm written several m5stickC demo with Arduino IDE.
Q. May I upload several binary files to m5stickC,
As well as, choose binary file I want to run when power on.
Hello,
I want to draw an image in m5stickC using Arduino IDE, but the image non-stop flash in screen.
void loop() {
// Change the sprite position
x = ...
y = ...
// Clear screen
M5.Lcd.fillScreen(WHITE);
// Redraw image to new location
M5.Lcd.drawBitmap(x, y, w, h,(uint16_t *)img, 0xffff);
}
Does m5stickC provide similiar functions / demo code:
Thanks
Guy
I also used baud 75000, still can't install UIFlow firmware.
My install steps:
esptool.py v2.5.0
Serial port COM3
Finished
Command:
--chip esp32 --port COM3 --baud 921600 --before default_reset --after no_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect 0x1000 bootloader_0x1000.bin 0x10000 MicroPython_0x10000.bin 0x8000 partitions_mpy_0x8000.bin 0xf000 phy_init_data_0xf000.bin 0x170000 spiffs_image_0x170000.img
[1948] Failed to execute script esptool
esptool.py v2.5.0
Serial port COM3
Traceback (most recent call last):
File "esptool.py", line 2849, in <module>
File "esptool.py", line 2842, in main
File "esptool.py", line 2549, in main
File "esptool.py", line 213, in init
File "site-packages\serial_init.py", line 88, in serial_for_url
File "site-packages\serial\serialwin32.py", line 62, in open
serial.serialutil.SerialException: could not open port 'COM3': PermissionError(13, '�s���Q�ڡC', None, 5)
Why I can't see UIFlow Logo when I first power on it.
What did I do wrong step?
@thrasher Absolutely 100% legal USB-C cable from product box.
As well as, I try to use my another PC (Win10) still can't identify.
This new m5stickC automatically run a testing program, How can I go to UI Flow Menu.
Thanks
I am a new user of m5stickC.
I use Win7 & installed CP210xVCP driver successful.
But still can't identify m5stickC always show unknown device in device manager.
Thanks