@greoj, your suggestion was incredibly helpful. With my previous example, I was able to achieve 9 days of continuous operation without any suspensions. Now, with the asynchron ezData function, I'm able to record data on load every 5 seconds and it's working great. When errors pop up, the program continues to work and is able to start recording values again after a while. I think you managed to solve the problem. I'll let @ajb2k3, @lmartu68 and @felmue know."
@ajb2k3 I didn't even know there was such a cool guide and I'm waiting for the second book. Good luck :)
I've played with the core2 device a bit and I'm not quite satisfied. The connection with ezData is not stable enough and I keep getting errors
Now I made a program that uses the If function and sends information every 60 seconds. So far it has been working stably for 24h.
@felmue forward
@ajb2k3 I have managed to connect to the AWS platform so far. I can send and receive information, only I do not know at this point how to make it publicly accessible and with graphs over time. I bought core2 because it was advertised as a great and easy to program device for everyone, and here it turns out that such a basic flaw has not been solved for over a year.
Thanks to your advice I increased the time in the loop to 25 seconds and so far it works (still testing). Unfortunately for one value. My project assumes 7 values from the temperature sensors, so I will have to refresh the loop every 3 minutes :)
@felmue It is strange that you can not communicate with the server. In my case the program works up to 8sec and gets error 23.
I'm disappointed because I bought 3 Core2 devices and sensors that I can't use now and probably won't be able to return them anymore
@felmue Hi, were you able to solve this problem? Despite software version v1.11.0, I still can't stably connect to ezData. Even when I try to do Remote+ connection with reading temp sensor values it does not work. I can give the simplest code that counts every second and increases the value by one it still does not work. Do you know how I can connect Core2 so that I can store the temperature measurement in time and have remote access> thanks for any advice.
