OpenMQTTGateway now support M5Atom regular and lite version, so you can fit all the BLE gateway power of OMG into this tiny box!
And recover the data from many off the shelf BLE sensors:
https://docs.openmqttgateway.com/prerequisites/devices.html#for-ble-devices
Freshly added below;
https://github.com/1technophile/OpenMQTTGateway
@pepsi said in M5StickC and 18650C endurance:
@crami25 the question was not related to the M5Stack but to the M5StickC. And most powerbanks will only work for a few minutes. this because the current is to low and the powerbank will cute off the power.
I can confirm this behaviour with a RAVPower bank, I have tried to power low current sensors with it and it was a failure due to the cut off.
OpenMQTTGateway enable to concentrate in one gateway different technologies (BLE, 433mhz, IR, LORA) decreasing by the way the number of proprietary gateways needed for your home automation, and hiding the different technologies singularity behind a simple & wide spread communication protocol; MQTT.
As it is compatible with many boards why not taking the advantage of the M5 boards display and power management.
This is now the case with the adds below:
Display support:
https://community.openmqttgateway.com/t/m5stack-and-m5stick-improved-support/942
and
Low power mode:
https://community.openmqttgateway.com/t/esp32-low-power-mode/943
As a part of many feature available for tests on v0.9.4beta