4. cant flash latest m5 stamp c3

cant flash latest m5 stamp c3

  • H

    I FOUND THE SOLUTION!!!
    After diving into deep of operating system I figured out a possible solution which worked for me:

    1. I had a usbserial.kext laying in /Library/Extensions/ and I figured out that it was also a WCH driver
    2. I deleted usbserial.kext and restarted the Mac again => no success
    3. I deleted CH34xVCPControlDriver.kext and CH34xVCPDriver.kext in /Library/Extensions/ and restarted again
    4. I installed another driver: FTDIUSBSerialDextInstaller_1_4_7 and had to confirm SIP integrity
    5. In system preferences -> security I had to enable access for the FTDI driver and saw another process pending named something with Quinheng
    6. As I remembered that Quinheng has something to do with WCH I ticked this process too and restarted
    7. I installed CH34xVCPDriver.pkg V1.7 again and restarted => no success
    8. I plugged in a CH340G device and suddenly a /dev/cu.wchusbserialXXX port appears in my Arduino IDE and is working with my CH9102 device
    9. Plugging out CH340G device continues /dev/cu.wchusbserialXXX working

    Hope that this solution will work for other people too!

    1