LORA-MODULE-868MHZ and LoRaWAN
remaille last edited by
I am using LORA-MODULE-868MHZ with LMIC stack for a device in a LoRaWAN network.
I successfully join the network. It sends three packets and then nothing else.
My pinmap seems correct.
But if I look at the scematic below, DIOx are not connected...
So my guess is that we can not do LoRaWAN with this module but only "raw LoRa".
Am I right ? It is not clear in the documentation.
felmue last edited by
it should work with LoRaWAN, but as you already mentioned DIO1 needs to be connected to a GPIO on the M-Bus. I found this article (sorry, it's in German).