CORE, RS485 and 2x2RELAY...

[cryptospok]

I have a simple code that displays the date, time, temperature and humidity data acquired by an RS485 device (XY-MD04), but the console keeps displaying the following messages:

E (18258813) mqtt_client: esp_mqtt_client_init(800): Memory exhausted
E (18258814) mqtt_client: Client was not initialized
E (18258815) mqtt_client: Client was not initialized

I have a CORE, 2x 2RELAY modules, an M5GO module (Port C), an RS485 converter via Port C and an XY-MD04 humidity and temperature sensor via RS485.

I'm not even using MQTT...

How do I know the size of my CORE's memory?
What is the size of the code I can use, and how do I know it?
My project is based on activating the relays based on RS485 data readings and timing (RTC). With the same code, sometimes it works, sometimes it presents execution errors.

I am very, very grateful for any help!

[cryptospok]

Thius is the code:

[teastain]

@cryptospok

https://docs.m5stack.com/en/core/basic_v2.7

ESP32-D0WDQ6-V3
520KB SRAM,
Flash 16MB

[cryptospok]

@teastain thank you!