Core2 - Sending midi to a DAW.
-
This post is deleted!
-
Core2 use a CP2104/CH9102F chip for USB-UART communication over USB. Your PC will see a UART (serial port) device (like the good old RS-232) not a midi device. To solve your problem you need either a piece of software on your PC that emulates a MIDI interface and route the data from UART or a piece of hardware that act as USB MIDI interface and is connected to your Core2 by GPIO. It might also be a solution to send MIDI over the (Wifi-) network.
-
This post is deleted!
-
This post is deleted!
-
This post is deleted!