Unable to burn M5 Core 2 COM port not available
-
Hi there,
I am facing a silly issue. My Core 2 runs a programme that uploads Temp data to a cloud server.
The program runs in autostart mode, after having finalized it in Run mode, I uploaded it.
I would like to burn the firmware again to start a new projectThe issue is that the COM port does not show up when I connect the device to my computer.
I suspect that the program is monopolizing the COM port. I have been tryng several attempts : remove the Unit to have the program crash, shut down the program.. No success.Could you give me advice on how to recover my COM port ?
Thanks for your suggestionscsierra67
-
You may disregard this post. I changed for another USB cable and was able to recover COM3
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login