I hope this is she right place. I have M5StickC nits But It seems stuck or something
-
I hope this is the right place. I have M5StickC nits But It seems stuck or something I'm trying to program them to use as Tally lights talking the Blackmagic ATEM switcher. I tried to follow a few examples on the internet. the main problem for most of the time was that I couple even get my macs to work with it at all. I finally got access to a windows machine and got the project to verify then It said it uploaded. Or so I thought. I just had a very bark grey screen and the light was stuck on. I assume that this may have something with not having access to the switcher. So I got the switcher and put it on the network where it could be seen from the M5 and rebooted it using the side button and still just a dark screen and the light stuck on. Now the Arduino software on the windows machine doesn't see it either. It used to show up as COM 3 but now nothing.
-
Hello @calmasacow
I get the impression you are trying to do to many things at once. May I suggest you start slow and take it step by step?
- first make sure you can upload a program from your computer successfully and multiple times
- start with a simple program like this
- then try to modify it, for instance by changing the text
Only if above steps work reliably it makes sense to continue with your own stuff.
Good luck!
Felix
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login