if it can help you :
any update of demonstration source code for the sim module with realtime streaming audio over Gsm ?
Looking for using it as a basic talking only smartphone in full duplex, send and receive at the same time ?
If possible Under Arduino IDE , with ino file ...
Good project and information..
Great thanks..You are right : add the zip Library fails, and cause my problems.
As you suggest with Include ..
It compiles now ok.
Great project and work ..
Can we record realtime data on SD card without streaming over Wireless at the same time...
What is the maximum rate to record on local SD as oscilloscope with one-two signal ?
Great multi-application ...
Can it be a sd-card image to update too ?
Good stuff and waiting for both Bluetooth and wifi ...
Here is github for one example with BLE only..
If it helps somebody...
Other examples compile ok, except the factorytest with all new installation.... from the zip backup.
Any suggestions, idea, to help and recompile the good factorytest.ino example ...
Waiting for your support and have a good day...
just for information :
Expressif seems to get both Bluetooth on going...
How to combine-create a new blufi.ino code with both wifi and dual Bluetooth at the same time too ..
Ok if a new lesson is possible...
My be subject : low power, high speed logger on sd card in bit mode (?), and then transfert over Bluetooth or wifi ..
where and what is the best firmware version number including WIFI and dual mode of bluetooth at the SAME time ?
Any weblink and source under Arduino too is welcome.
At the same time, wondering for low power, and uSD card speed/read/write ( 4 bit SDIO mode ?) to store information very quickly for high speed from few SPI devices (or I2C)...
Keep going on the nice and good M5 stack device...
与 M5Stack Community 的连接断开，我们正在尝试重连，请耐心等待