5. M5Stack Fire Buttons is not working.

M5Stack Fire Buttons is not working.

  • P

    When I burn uiflow 2.0 for my M5Stack fire device, my buttons work very easily, but when I make a project and want to use the buttons, my buttons do not work. I am using Arduino IDE. My code is below.

    #include <M5Stack.h>

    // Menü seçeneklerini tanımla
    const char* menuOptions[] = {"WIFI EXPLOITS", "BLUETOOTH EXPLOITS", "BAD KB", "BAD USB", "SETTINGS"};
    int selectedOption = 0;

    void setup() {
    M5.begin();
    M5.Lcd.setRotation(1); // Ekranı yatay modda kullan
    M5.Lcd.fillScreen(TFT_BLACK);
    drawMenu();
    }

    void loop() {
    // Butonları kontrol et
    if (M5.BtnA.wasPressed()) {
    previousOption();
    drawMenu();
    }
    if (M5.BtnC.wasPressed()) {
    nextOption();
    drawMenu();
    }
    }

    void drawMenu() {
    M5.Lcd.fillScreen(TFT_BLACK);
    M5.Lcd.setTextColor(TFT_WHITE);
    M5.Lcd.setTextSize(2);

    // Menü başlığını çiz
    M5.Lcd.setCursor(20, 20);
    M5.Lcd.print("MENU");

    // Menü seçeneklerini çiz
    for (int i = 0; i < 5; i++) {
    if (i == selectedOption) {
    M5.Lcd.fillRect(20, 50 + i * 30, 220, 25, TFT_WHITE);
    M5.Lcd.setTextColor(TFT_BLACK);
    } else {
    M5.Lcd.setTextColor(TFT_WHITE);
    }
    M5.Lcd.setCursor(30, 55 + i * 30);
    M5.Lcd.print(menuOptions[i]);
    }
    }

    void nextOption() {
    selectedOption = (selectedOption + 1) % 5;
    }

    void previousOption() {
    selectedOption = (selectedOption + 4) % 5;
    }

    0

  • Hello @poyrazturkoglu

    please have a look at the button example here.

    I think you are missing an M5.update() inside the loop().

    Thanks
    Felix

    0