Arduino M5Stack Camera.



  • Sorry noob question but what do I need to do to port this to the m5stack camera?

    #include <MPU6050_tockn.h>
    #include <Wire.h>

    MPU6050 mpu6050(Wire);

    long timer = 0;

    void setup() {
    Serial.begin(9600);
    Wire.begin();
    mpu6050.begin();
    mpu6050.calcGyroOffsets(true);
    }

    void loop() {
    mpu6050.update();

    if(millis() - timer > 1000){
    Serial.println("=======================================================");
    Serial.print("temp : ");Serial.println(mpu6050.getTemp());
    Serial.print("accX : ");Serial.print(mpu6050.getAccX());
    Serial.print("\taccY : ");Serial.print(mpu6050.getAccY());
    Serial.print("\taccZ : ");Serial.println(mpu6050.getAccZ());

    Serial.print("gyroX : ");Serial.print(mpu6050.getGyroX());
    Serial.print("\tgyroY : ");Serial.print(mpu6050.getGyroY());
    Serial.print("\tgyroZ : ");Serial.println(mpu6050.getGyroZ());
    
    Serial.print("accAngleX : ");Serial.print(mpu6050.getAccAngleX());
    Serial.print("\taccAngleY : ");Serial.println(mpu6050.getAccAngleY());
    
    Serial.print("gyroAngleX : ");Serial.print(mpu6050.getGyroAngleX());
    Serial.print("\tgyroAngleY : ");Serial.print(mpu6050.getGyroAngleY());
    Serial.print("\tgyroAngleZ : ");Serial.println(mpu6050.getGyroAngleZ());
    
    Serial.print("angleX : ");Serial.print(mpu6050.getAngleX());
    Serial.print("\tangleY : ");Serial.print(mpu6050.getAngleY());
    Serial.print("\tangleZ : ");Serial.println(mpu6050.getAngleZ());
    Serial.println("=======================================================\n");
    timer = millis();
    

    }

    }


登录后回复
 

与 M5Stack Community 的连接断开,我们正在尝试重连,请耐心等待