M5 stick (non C) - Can't find Arduino frimware for the screen



  • Hi guys,
    i'm totaly new to the M5 world and i'm struggling to find the software to make it run on arduino.
    I can flash the blue led, I can take the Button input but i'm enable to make the screen work with arduino (it works fine in UI Flow).
    I can find all the support and the software for the M5StickC but not for the M5stick "classic"/"OLED".

    Can anyone help me ?

    Thanks !



  • Ok after hours and hours of searching here is what i found. This is the bare minimum for writing à simple text on the OLED screen of the M5Stick "non-C" :

    #include <U8x8lib.h>

    U8X8_SH1107_64X128_4W_HW_SPI u8x8(14,27,33);

    void setup() {
    u8x8.begin();
    }

    void loop(){
    u8x8.setFont(u8x8_font_chroma48medium8_r);
    u8x8.setCursor(0,0);
    u8x8.print("M5Stick");

    delay(1000);
    }



  • I made these examples quite some time ago https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Core/M5Stick/Arduino using u8glib library to display text is quite easy but I could never get my head around the glyph drawing