Color Sensor RGB Unit UI 1.3.2 (TCS3472) / R G B Data always on 0

[Alf]

My sensor only shows me the RAW data.
The values of R G B (single) are always 0.

UI V1.3.2 / V 1.4.0

Contains a calibration table which is probably wrong:

1. values smaller than 0 must be set to zero
   If the calibration table matches the integration time of 154 MS. The Arduino example assumes 50 MS.

3 The module reacts logarithmically. So it should not be approximated with a 3rd degree function !

Could this be checked?
I would like to make an instruction video on my Youtube channel (UI Flow),
but I can't get any further.

Alf

[ajb2k3]

Contact me after 6pm GMT on Discord and I will see what I can do.