Possible issue with Tab5 and UiFlow v2.3.1 - (i2c driver install error)
-
I was trying to test the Tab5 with the M5Stack Tube/Air Pressure Unit sensor (U130).
Unfortunately, every time I try to deploy and run a simple program to show the readings from the Tube Pressure sensor using UiFlow v2.3.1 I get a i2c driver install error and the program does not load on the Tab5. See attached images...
Has anyone had success with using the Tab5 with the Tube Pressure sensor and UiFlow v2.3.1?
Thanks!
-
for start Tube Air Pressure unit is not i2c device, it gives out analog value... something not right with unit/tube pressure lib
-
@robski Ok, so I am not going crazy... I thought the Tube Pressure sensor was analog [PortB(GPIO)] but when tried to configure the settings for Tube Pressure port in the Unit window of UiFlow, the port it came up with was Port A(G54, G53, V, G) as the default port... See attached photos...
Is there anyone at M5Stack support team we can reach out to regarding a possible bug with the Unit/tube pressure lib?
