🤖Have you ever tried Chat.M5Stack.com before asking??😎

Categories

  • Firmware updates, Hardware Revisions, New Product info can be found here.

    75 Topics
    826 Posts
    KhanFromNorthK
    You can continue developing on the M5Stack Core2 reliably. The key is to bypass UIFlow entirely and use MicroPython directly through Thonny or VS Code.

  • M5Stack Events

    8 Topics
    31 Posts
    kurikoK
    @Apex574R Does the Userdemo firmware running normally?

  • Wish for a feature that doesn't exist yet? this is the place to ask for it. we will collect all the requirements and enquiry's and who knows ... sometime wish might come true!

    222 Topics
    676 Posts
    R
    I took a closer look and compared M5StampS3A vs M5StampS3 BAT and I must say that it is not possible to do any piggyback for pin mapping at the M5StampS3A level since ESP32-S3FN8 vs ESP32-S3-PICO-1-N8R8 have differences in the number of GPIOs (6 pins error), see the difference table below: [image: 1774204115000-f8a8e80c-1dca-472a-ab48-dac7e6656c42-image.png] So it only remains for M5Stack team to upgrade M5StampS3A for 2/8 PSRAM, i.e. have M5StampS3B version.

  • Forum rules - Announcements - General chit chat (ESP-32, ESP-8266, IoT, Raspberry Pi etc...)

    971 Topics
    3k Posts
    D
    @2-4-6-h8 I am experiencing the same issue. I've registered on this site (obviously) and confirmed my email address. The Android app just spins when I try to register on it. I attempted update the StackChan's firmware but when I connected to my Wifi, it restarted on its own. Now when I click on the "Change Wi-Fi" section under setup, it shows me the QR screen to download the app, then just shows me the StackChan ID. I It seems no one is monitoring these forum posts, as a lot of threads are going unanswered. I hope this can be resolved because this is been a frustrating and disappointing experince thus far.

  • Core and Modules info.

    3k Topics
    14k Posts
    D
    Your RFID 2 module is likely not broken. The "Failed authenticating" error is the key clue here. Mifare 1KB cards use sector-based authentication with crypto keys. Bruce (and most generic RFID readers) will attempt the default keys (e.g. FF FF FF FF FF FF or A0 A1 A2 A3 A4 A5) to authenticate, but if FlipperZero or NFC Tools wrote data using custom or non-default keys, authentication will fail even though the UID and card type are read correctly. Things to try: Test with a blank/factory card. If it reads fine, your module is working. Check what keys were used when writing via FlipperZero or NFC Tools and make sure Bruce is configured to use those same keys. If the card was written with default keys, try a different card; it may have been locked or write-protected. The fact that UID, ATQA, and SAK are being detected correctly strongly suggests the module is functional.

  • Projects Sharing.

    488 Topics
    2k Posts
    B
    A CP/M emulator that runs via a USB serial terminal. Mainly focused on the tools that run under the emulation, providing the ability to monitor the cpu, memory and other aspects of the emulation, a great way to learn how CP/M works. Please see the repository for detailed info. Also provides a very minimal set of file functions, that can be used to list the files and folders on the SDcard, plus a few more risky functions like mkdir, rmdir, rm, cp, cmp. It only support full path names and has no error checking, so it should be used with extreme caution. Github Repo It is also available via the M5Burner. Sample screen shot of examining the contents of a CP/M disk img. [image: 1778817876553-cpm.disks.png] A session of running Star Trek (customized by me to fit in 60 columns) in CP/M [image: 1778817905198-star.trek.png]

  • This is the place to discuss driver issues, M5 burner troubleshooting, and development of software compatible with M5Stack

    3k Topics
    10k Posts
    C
    Im trying to run uiflow, but getting api error. im trying to login but credentials are failing. reset pw takes me to M5. what do i do?

  • 261 Topics
    569 Posts
    J
    Привет, разобрался? такая же тема после прошивки