@ajb2k3 said in UiFlow 2.0 Alpha verison discuss(how-to, bug, feature request or sometings):
Looks a lot cleaner but only being able to select the Atom S3 make it difficult to test.
Ah, will support more device in the future,won't be long :)
@ajb2k3 said in UiFlow 2.0 Alpha verison discuss(how-to, bug, feature request or sometings):
Looks a lot cleaner but only being able to select the Atom S3 make it difficult to test.
Ah, will support more device in the future,won't be long :)
@mm-uiflow
Sorry, still under developing, UIFlow 2.0 it's big project, not only the firmware.
uiflow-lvgl-2.0-xxx 会支持lvgl的所有控件(应该)
In order to reduce the size of the firmware, we had to disable some of the built-in fonts. We have disabled some fonts in V1.9.8, but we didn't tell you(It's our mistake). After V1.9.9, we only support the following fonts, but we are working on another way that can make you load font from file system dynamic.
FONT_MONT_10 = lv.font_montserrat_10
FONT_MONT_14 = lv.font_montserrat_14
FONT_MONT_18 = lv.font_montserrat_18
FONT_MONT_22 = lv.font_montserrat_22
FONT_MONT_26 = lv.font_montserrat_26
FONT_MONT_30 = lv.font_montserrat_30
FONT_MONT_34 = lv.font_montserrat_34
FONT_MONT_38 = lv.font_montserrat_38
FONT_MONT_48 = lv.font_montserrat_48
FONT_UNICODE_24 = lv.font_PHT_unicode_24
Hi @mengxiyou @SE
We are very sorry, we disable some font but we didn't tell you, as @mengxiyou said, the reason is to reduce the binary size, so we had to disable some font.
After V1.9.9, only these font was builtin, but we are working on another way that can make you load font from file system dynamic.
FONT_MONT_10 = lv.font_montserrat_10
FONT_MONT_14 = lv.font_montserrat_14
FONT_MONT_18 = lv.font_montserrat_18
FONT_MONT_22 = lv.font_montserrat_22
FONT_MONT_26 = lv.font_montserrat_26
FONT_MONT_30 = lv.font_montserrat_30
FONT_MONT_34 = lv.font_montserrat_34
FONT_MONT_38 = lv.font_montserrat_38
FONT_MONT_48 = lv.font_montserrat_48
FONT_UNICODE_24 = lv.font_PHT_unicode_24
ZH-CN:
EN:
ZH-CN:
EN:
ZH-CN:
EN:
ZH-CN:
EN:
ZH-CN:
EN:
Hi everyone, new firmware is coming, we support ESP32C3 now.
UIFlow 2.0.0 firmware preview version
UIFlow 2.0.1 firmware preview version
Please download the above firmwares, use esptool or Flash Download Tools to write the firmware at offset 0x1000.
esptool.py --chip esp32 --port /dev/ttyUSBx --baud 1500000 write_flash 0x1000 uiflow-b061698-esp32-4mb-20220304.bin #uiflow-b061698-esp32-spiram-4mb-20220304.bin
esptool.py --chip esp32c3 --port /dev/ttyUSBx --baud 1500000 write_flash 0x0 uiflow-b061698-esp32c3-4mb-20220304.bin
# if you flash the firmware through the USB port, you need press the button A before you plug USB cable enter the download mode
esptool.py --chip esp32c3 --port /dev/ttyUSBx --baud 1500000 write_flash 0x0 uiflow-b061698-esp32c3-usb-4mb-20220304.bin
P.S.
Follow M5STACK on twitter for the latest news about UIFlow 2.0 new update.